XMEGA Xminilab

Miniature mixed signal oscilloscope with an arbitrary waveform generator in a small module
XMEGA Xminilab
With shipment USPS Ground International 1lb. for $20.00
Base price for variant $59.00
Sales price $59.00
Sales price without tax $59.00
Discount
Tax amount
Price / COM_VIRTUEMART_UNIT_SYMBOL_:
24h.gif
Xminilab back
Amber Xminilab
Hardware 2.3
Xminilab Amber
XMEGA Xminilab
Description
book schematics code hex file spreadsheet pc-wave movie picture faq forum
Manual EN
Translations
Schematics Code Hex BOM Interface Videos Pictures FAQ Forums

Current stock has a? GREEN display

The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.

Features:

  • Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
  • Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
  • Meter Mode: Average, Peak to peak and Frequency readout.
  • XY Mode (Plot Lissajous patterns or see the phase difference between two waveforms).
  • Spectrum Analyzer with different windowing options and selectable vertical log.
  • Horizontal and Vertical Cursors with automatic waveform measurements.
  • Arbitrary Waveform Generator with Sweep on all parameters.
  • Display options: Persistence, Different grid options, and more.

General Specifications:

  • ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
  • Graphic OLED display 2.42", 128x64 pixels
  • Module size: 3.3" x 1.75"
  • PDI interface.
  • 4 tactile switches
  • USB connectivity: Windows, Linux, MAC, Android

Logic Analyzer specifications:

  • 8 Digital Inputs, 3.3V level.
  • Maximum sampling rate: 2MSPS
  • Frequency counter: 16Mhz
  • Protocol Sniffer: UART, I2C, SPI
  • Internal pull up or pull down.
  • Buffer size: 256

Oscilloscope specifications:

  • 2 Analog Inputs
  • Maximum Sampling rate: 2MSPS
  • Analog Bandwidth: 200kHz
  • Resolution: 8bits
  • Input Impedance: 1M?
  • Buffer size per channel: 256
  • Input Voltage Range: -14V to +20V

AWG specifications:

  • 1 Analog Output
  • Maximum conversion rate: 1MSPS
  • Analog Bandwidth: 44.1kHz
  • Resolution: 8bits
  • Output current > +/- 7mA
  • Buffer size: 256
  • Output Voltage: +/- 2V

Optional Accessories (soldering required):
- PDI Programming Header: Only needed to do firmware development on the device.
- Jumper Wires: Useful for breadboard prototyping, 6" male to male.

USB Cable
No cable
Regular USB Cable 3ft
Regular USB Cable 6ft
PDI Header
No Header
2x3 Header
Printed Manual
None
Include Printed Manual
USB OTG Adapter
None
Included

Reviews

Thursday, 01 November 2018
This is a wery good little scope. Skipped the sniffer part on my first one and built it into an aluminium shell with standard bnc
connectors.
TORKEL BRAEKHUS
Thursday, 31 October 2013
I just can say it enough: this oscilloscope ROCKS! The ability to decode I2C, SPI, UART is just unbelievable!
Gheorghe Popa-Radu

Search

Search Store

Products


Shopping Cart

 x 

Cart empty

Testimonials

I have been impressed with the designs and ideas produced by your company.
Greg Elseth

 

Official PayPal Seal


credit-cards