Miniature mixed signal oscilloscope with an arbitrary waveform generator in a DIP module
The Xprotolab is the first mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 1 x 1.6 inches and can be mounted directly on a breadboard. The Xprotolab can also be used as a development board for the AVR XMEGA microcontroller.
Features:
- Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
- Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
- Meter Mode: Average, Peak to peak and Frequency readout.
- XY Mode:
- Plot Lissajous patterns
- See the phase difference between two waveforms
- V/I Curve tracer with an external resistor
- Spectrum Analyzer with different windowing options and selectable vertical log.
- Horizontal and Vertical Cursors with automatic waveform measurements.
- Arbitrary Waveform Generator with Sweep on all parameters.
- Display options: Persistence, Different grid options, and more.
|
General Specifications:
- ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
- Graphic OLED display 0.96", 128x64 pixels
- Module size: 1.615" x 1.01"
- PDI interface.
- 4 tactile switches
- USB connectivity: Windows, Linux, MAC, Android
|
Logic Analyzer specifications:
- 8 Digital Inputs, 3.3V level
- Maximum sampling rate: 2MSPS
- Frequency counter: 16Mhz
- Protocol Sniffer: UART, I2C, SPI
- Internal pull up or pull down.
- Buffer size: 256
|
|
Oscilloscope specifications:
- 2 Analog Inputs
- Maximum Sampling rate: 2MSPS
- Analog Bandwidth: 200kHz
- Resolution: 8bits
- Input Impedance: 1MΩ
- Buffer size per channel: 256
- Input Voltage Range: -14V to +20V
|
AWG specifications:
- 1 Analog Output
- Maximum conversion rate: 1MSPS
- Analog Bandwidth: 44.1kHz
- Resolution: 8bits
- Output current > +/- 7mA
- Buffer size: 256
- Output Voltage: +/- 2V
|